Dryer Repair in San Angelo, TX

No heat, long dry times, or drums that won’t turn — diagnosed fast, including lint-related fire-risk checks other companies skip.

A dryer that runs but doesn’t heat, or that takes two or three cycles to actually dry a load, is one of the most common service calls we get in San Angelo. It’s also one of the few appliance issues with a real safety dimension — a restricted lint path is a leading cause of house fires — so every dryer visit includes a check of the full exhaust path, not just the part that failed.

Common Dryer Repair Problems We Diagnose

SymptomLikely cause
Runs but doesn’t heatMost often a blown thermal fuse (usually caused by restricted airflow), a failed heating element, or a faulty cycling thermostat.
Takes multiple cycles to dry a loadAlmost always a partially or fully blocked exhaust vent or lint path — not a machine defect. We check the full vent run, not just the trap.
Drum won’t turn even though the motor runsTypically a broken drive belt or a worn idler pulley.
Loud squealing or grinding when tumblingUsually worn drum support rollers, a bad idler pulley bearing, or a glide on the drum’s felt seal.
Won’t start at allCan be a door switch, a start switch, a thermal fuse that’s tripped as a safety cutoff, or a control board fault.

Signs You May Need Dryer Repair

  • Clothes come out hot but still damp
  • The outside of the dryer feels unusually hot during a cycle
  • A burning-dust smell during operation
  • The cycle takes noticeably longer than it used to
  • Lint visible around the door seal or vent hood outside

What Affects the Cost of Dryer Repair

FactorWhy it matters
Gas vs. electricGas dryers have an igniter and gas valve system that electric models don’t
Vent-path conditionA severely restricted vent run may need cleaning in addition to any part repair
Part typeA thermal fuse or belt is inexpensive; a control board or motor costs more
Stackable/combo unitsStacked and washer-dryer combo units can take longer to access

Every visit includes an upfront diagnostic, so you’ll know the exact cost before any repair begins — not an estimate that changes once the technician is on-site.

Dryer Repair technician at work in San Angelo, TX

Call San Angelo Pros

(325) 610-0443
Mon–Sat, 8:00 AM – 6:00 PM

Request Service
FAQ

Dryer Repair Questions We Hear Most

Why is a blocked dryer vent dangerous, not just inconvenient?

Lint is highly flammable, and a restricted vent traps heat and lint together inside the machine and duct run. The U.S. Consumer Product Safety Commission and fire departments nationally cite dryer lint buildup as a leading cause of home dryer fires. If your dryer is taking multiple cycles to dry, have the vent path checked before it becomes a hazard, not just an inconvenience.

Is a dryer not heating usually a cheap fix?

Often yes — a thermal fuse or thermostat is a low-cost, quick repair. A heating element or gas valve replacement costs more but is still typically far less than replacing the dryer.

Do you service gas dryers?

Yes, our technicians are equipped to safely diagnose and repair both gas and electric dryers.

Need Dryer Repair in San Angelo?

Call (325) 610-0443 or request service online — most repairs are scheduled same-day.